The mattress tape edge machines are made for the industrial work floor of businesses to withstand thousands of hours of use without needing repair or maintenance.
The mattress sewing machines are dedicated to the consistency and evenness of stitches, regardless of the thickness of the fabric.
1. Does the mattress sewing machine need lubricating?
2. How to deal with the stuck mattress sewing machine due to lack of lubrication?
3. How to lubricate a mattress sewing machine?
-Does the mattress sewing machine need lubricating?
Yes! In the case of lubricants, two types of lubricants are used in the mattress sewing machine. First is the metalworking or cutting fluid that is used on the cutting surfaces. The second is the lubricants that assist the internal machinery.
Making the right choices for both is essential to maximizing mattress sewing machine performance and lifespan. Using the wrong lubricant has the potential to be disastrous, as it not only affects the lifespan of the mattress sewing machine but also directly impacts products’ quality.
Extreme heat and friction can quickly lead to a broken tool mattress sewing machine. However, these can all be avoided by using the proper metalworking fluid. Lubrication helps the mattress sewing machine to work more easily, which generates less heat and friction and clears the chips.
-How to deal with the problems of mattress sewing machines due to lack of lubrication?
Most of the mattress sewing machines are stuck between the feeding eccentric and the tooth-lifting link.
First, check the feeding eccentric wheel. Loosen the nut and take out the shaft screw of the lifting rod. Take out the feeding connection at the lower part of the feeding rod. Then roll the handwheel back and forth by hand. If it can roll to drive the tooth-lifting link and the feeding link, it can be seen that the lower ends of the two links swing with the rolling of the handwheel at the same time. if it is found that the upper shaft rolls with the swing of the two connecting rods, the feeding eccentric wheel has been stuck.
Fully add oil to the eccentric wheel so that the oil can penetrate in. Otherwise, a sponge can be used to absorb enough oil to put on the eccentric wheel for hours. Turn the lower end of the two connecting rods in turn until the two connecting rods move to roll the handwheel for a week. When the V-belt can drive the handwheel to roll, refuel all the rollable parts of the mattress sewing machine.
-How to lubricate a mattress sewing machine?
Determine the lubrication part, point, and inspection point of the mattress sewing machine by the operator.
Use oil according to the grease grade specified in the mattress sewing machine. Ensure the amount of refueling in the lubricating parts of the mattress sewing machine to prevent extravagance and manage oil leakage. The lubricating mattress sewing machine must be on schedule. Refuel and clean the oil according to the operation instructions timely.
Following the business philosophy of integrity, professionalism, united wisdom, sharing, and win-win, Infinity Machinery insists on innovation to pursue excellence and high-quality mattress sewing machines for customers.
